3-רכיב פוליאוריטן בלחץ נמוך המכונה, קצף ומזג מכונת

ספוג עושה הזרקת מכונה

פרטים מהירים


מערכת מכונה: מזיגה, מינון, ערבוב ויציקה

מערכת חומרים אופיינית: TDI+MOCA/MDI+MOCA/Prepolymer + MOCA/E-300

יישומים: מוטות Pu, יריעות Pu, גלילי Pu, חלקי Pu לתעשייה וכן הלאה

תיאור מוצר מפורט


מכונת יציקת אלסטומר מסדרת EA 2 רכיבים, מכונת מינון, מכונת ערבוב

1. סיכום:

מכונת הזרקת יציקת pu שלנו היא שהחברה שלנו עוקבת אחר המוצרים הטכנולוגיים המתקדמים הבינלאומיים, מייבאת את חלקי המכונה העיקריים ממדינות זרות ומותגים מפורסמים. מכאן שהביצועים הטכניים והבטיחותיים של הציוד הגיעו לרמה מתקדמת של אותו מוצר מאותה תקופה בחו"ל.

מכונה זו משמשת לייצור מוצר אלסטומר פוליאוריטן יציקה המשתמשים ב-MOCA ובחומר אחר כמאריך שרשרת, כגון רולר הדבקה, רפידה, גלילים לשימוש במעלית ומוצרים קשיחים במיוחד ויכולה להרכיב פרה-פולימר ומסיר קצף בוואקום במכונה זו.

ניתן להחליף גומיות PU שונות באופן מיידי כדי לייצר מעבד מחומרים שונים.

2. פרמטרים ותיאורים עיקריים לציוד

2.1 סוג: מכונת יציקת PU עם ריבוי רכיבים (אופציה)

2.2 מערכת הקצפה מתאימה: מוצרי Pu אלסטומר

2.3 . צמיגות (cps):

A(פוליול או פרה-פולימר): ~4000mpa.s (45℃-100℃)

B(MOCA):10~1000 mpa.s (130℃)

2.4 תפוקת מזיגה: 2-10 ק"ג/דקה (100:14), סה"כ 5 סולמות לאפשרויות

טווח יחס ערבוב מתכוונן: 100:6 ~ 100:20 ישנם כמה הבדלי משקל כאשר צפיפות חומר הגלם ויחס הערבוב של חומר הגלם שונים.

אפשרות: ניתן להוסיף רכיב נוסף לשימוש בפיגמנט או סוכן.

3. תיאור טכני:

3.1 טנקים (A,B, טנק)

חומר הטנק: נירוסטה AISI 304

עם מעיל חימום

קיבולת מקסימלית: A220L B60L

קיבולת שימושית: A160L, B45L

מערכת חימום: מחזור שמן

בדיקת טמפרטורה: חיישן PT100.

טמפ' מקסימלית: 130℃

סובלנות על החזקת הטמפרטורה: בתוך +/- 1.5 מעלות צלזיוס

מיקסר: חומר נירוסטה, סוג עוגן

מהירות ערבוב: מותאמת לפי חומר גלם שונה

חלון בדיקה: חלון זכוכית בגוף הטנק

 

אפשרות: משרן חשמלי

מערכת עזר:

שואב אבק

מערכת מילוי חנקן

מד ואקום

מערכת מילוי חומרי גלם

מערכת ספיגת ואקום של חומר גלם

מערכת פריקת חומרי גלם


3.2 Pipe

Material: PTFE reinforced stainless steel with mesh

Heating system: OIL heating

Max working pressure: 20 bar
טמפ' מקסימלית: 130℃

Tolerance on the temperature holding: Within +/- 1°

אלה בידוד גמישות גבוהה צינור יכול להבטיח את עקביות הטמפרטורה של צינור שלם.

3.3Metering system(A,B, components)

Metering pump: Gear pump from German

Delivery capacity of Metering pump: A 40cc/r, B 6cc/r

Filters: Highly filtering surface Stainless steel 304.

Motor:Converter in accordance with tachometer and motor to control the flow speed.

ALL the metering system and fliters keep under the tank and within the heating

The measurement system and filter in ovens, insulation material below. This design method can be pressurized tank in the wrong circumstances, to maintai

3.4 Mixing head

Material: High strength alloy

Speed: 0.0 to 6500 rpm.
Heating: Independent electrical heating Mixing by mixed-head match with the motor

Temperature check: Thermal sensor.

Tolerance on the temperature maintenance: +/- 1°C

Motor: Electric motors, controlled by a frequency convertor.

Our uniquely mixing head design has the following features: It can guarantee the accuracy of speed, and at a very low speed of the mixed quality of raw materials; so that the prepolymer does not cause pressure damage to properties.

Made of special alloy mechanical seal system made the mixing head also could work in the high anti-pressure, while ensuring the reliability of mixed system.

Unique design of the mixing chamber can be cleaned to ensure easy-to-use and thoroughness.

3.4.1 Injectors for A,B,

Material: high strength alloy

Injection system: injection pressure independent of each other

The heating system: independent electrical heating

Temperature measurement system: PT100 thermal sensor

שגיאת טמפרטורה: שליטה + / - 1 ° C

Each injection pressure control is independent of each other, can be adjust alone pressure casting and recycling pressure. The loop injection pressure will be tested by the head of sensor, and with pressure adjusting device. This control method can avoid every time before pouring out some materials must be mixed and the uneven.

4.Option: Auxiliary Metering and injection system: for color, foaming agent and additive agent and so on

Pump: Gear Pump

Metering accuracy: 0.3%.

Flow range: 0.006-0.06L/min

Metering accuracy : 0.3%.

Pressure check: Pressure transducer.

Tank capacity: 0.6L/2L

Motor: Electric managed by an inverter.

Injectors: Single for each auxiliary with independently adjustable injection pressure.

4. Cleaning system

Tank:20L Stainless steel

Control of Liquid :Visual glass window

Low position warning electronic equipment (OPTION)

Injector: Inject raw material to mixing head directly

The running speed and circulation of cleaning solution,air,mixing head are are independent control system,this can make them aximum cleaning effect.

In order to the maximize reduce consumption of cleaning, settings of each component can be pre-cleaning procedures. The casting machine Settings when suddenly loses power in the artificial emergency cleaning device. Cleaning solution should use non-flammable solvents, such as:DBEMC

leaning procedures. The casting machine Settings when suddenly loses power in the artificial emergency cleaning device. Cleaning solution should use non-flammable solvents, such as:DBEMC.

5. 3-component Polyurethane Low pressure machine,Foaming and pouring machineElectric Board and software

Electronic display design according to the EC criteria.

Software: The software system can control the machine to work and in the standby machine control.

Data in the user interface through the following procedures:

* Working state real After all the machine on real-time parameters can be displayed on the interface, such as temperature, pressure, pumping and mixing speed, security levels, alarm conditions and other procedures set by the parameters must be displayed.

* Formula design program

The major setting and save the formula interface ( depth, temperature, pressure, etc). For each formula can be set and save 20 subroutine, these subroutines can cast the first one near the selector out directly.

* Calibration interface

This interface is mainly used to automatically correct out of three different charge, by a balancer to determine quality.

The software also include some other systems, such as casting machine maintenance control, work time, data statistics and alarm records. Computer softw

6.Machine Size

Height: 1,600mm

Length: 2000mm

Width: 2,200mm

Length of injection handle: 1,300mm

Weight: 1,500kgs

7.Installation terms:

Vacuum pump: 40m3/h

Compressed air: Dry air 5/7 bars

Flow capacity: > 5 Nm3/hour

Power: 220V/380V – 50 Hz (3P+N+T)

Installation environment: No install in the workshop of any explosion